• 
  Contractor backfilling in Quad "D" and Quad "A"
• 
  Looking south from north side of the hill over the Sedimentation Basin Nos. 1 & 2 and the Maturation Basin Nos. 1 & 2
• 
  Looking west along the north walls of Maturation Basin #1 and Sedimentation Basin #1
• 
  On top of the north hill looking south across the west side of Quad "D"

• 
  On top of north hill looking SE over Quad "D"
• 
  Forming for wall in the future Filtered Effluent Pump Station
• 
  Looking SW across the NW area of Quad "D"
• 
  Looking SE across the NW area of Quad "C"

• 
  Getting ready to set rebar mats in the area for Maturation Basin Nos. 1 & 2 and Sedimentation Basin Nos. 1 & 2
• 
  Setting rebar mats along the north side of Quad "D" for Maturation Basin No. 1 and Sedimentation Basin No 1
• 
  Interior wall in Quad "C" for the future Filtered Effluent Pump Station. See sht 3-A-2
• 
  Testing the Raw Water Collection Effluent Box going between steel pipe and PVC pipe

• 
  PVC and steel pipe of the Raw Water Collection Effluent Box
• 
  42" RW piping coming up thru the floor as shown on sht 3-M-3
• 
  North Dakota testing for compaction in the area of Quad "A"
• 
  Pumping the bases for the two 6" SSL piping going to be encased, two lines to drain / decant pump station

• 
  Pouring the bases for the two 6" SSL piping going north to south
• 
  Pouring the bases for the two 6" SSL piping. See sht 3-M-4
• 
  Base supports for the two 6" SSL piping going north to south, see sht 3-M-4
• 
  Forming for the 48" RW steel pipe and PVC 48", see sht 3-M-3

• 
  Forming the 48" piping going north from the NW corner of the water plant
• 
  Steel and PVC 48" piping being installed together as shown on sht 3-M-2
• 
  Installing the 48" PVC piping together, see sht 3-M-3
• 
  Installing 48" PVC piping together on the NW corner of the water treatment plant, getting ready to install the test station

• 
  Getting ready to install the test station with galvanic anodes, see sht 3-M-2 and detail 13933 (see sht 13930)
• 
  Finishing forming the 48" piping and 48" PVC piping at the NW corner
• 
  Visitors on project site this date in the Water Treatment Clearwell
• 
  Visitors on project site this date in the Water Treatment Clearwell

• 
  Galvanic anodes on east side of the piping as shown, NW corner of the building area
• 
  Anodes and forms for pipe encasement as shown on sht 3-M-3
• 
  All the wiring for the anodes and wiring on the outside of the forming, see sht 3-M-3
• 
  See wiring, anodes on the 48" PVC piping, see sht 3-M-3

• 
  Looking north from the south area of the location of the two 6" SSL piping, see sht 3-M-4
• 
  6" piping for the SSL piping
• 
  Contractor setting the 6" SSL being set and getting ready to encase in concrete
• 
  Contractor pouring the walls on the future filter, see sht 3-M-9

• 
  Piping openings in the SE corner area
• 
  Pouring the interior wall in the north side of the future Filter Effluent Pump Station
• 
  Two 6" SSL piping going north to south, getting ready for encasement forming
• 
  Rebar in the area of the floor area of the Maturation Basins and Sedimentation Basin No. 1

• 
  Pouring wall in the area of filter #8
• 
  Walls being formed on the south side of filters #5 thru #8
• 
  Encasing the 48" piping on the NE corner of the project site
• 
  Pouring the 48" piping next to the 42" piping on the NE corner of the Raw Water

• 
  Stripping the forms on the NE corner of the 48" piping
• 
  Forming the two 6" SSL piping going north to south
• 
  Pouring the floor and outside walls for Maturation Basins #1 and #2 along with Sedimentation Basins # 1 and #2
• 
  Re-shoring the stub wall in the SE corner of Sedimentation Basin No. 2

• 
  Pouring the supports for the two 6" SSL piping going north to south
• 
  Forms for the two 6" SSL piping going north to south, see sht 3-M-4