• 
  View of the Backwash Recycle Pumps in the lower BWR Pump Room
• 
  View of the Backwash Recycle Pumps in the lower BWR Pump Room
• 
  View of the Backwash Sludge Pump clearance with the slab
• 
  Looking at the Backwash Sludge Pumps in the lower BWR Pump Room
• 
  View of the 3:1 slope north of the BWR structure

• 
  View of the Clearwell Basin roof from the east wall
• 
  View of the west 24” FW pipe in the Clearwell Basin
• 
  View of the 4” PW and 8” NPW in the Clearwell Basin
• 
  View of the Sluice Gate (G-6-2) in the Clearwell inlet chamber
• 
  View of the BWS wall penetration in the Clearwell Basin

• 
  View of the BWS wall penetration in the Clearwell Basin
• 
  View of the Backflow Preventer (V960)
• 
  Looking at the 48” Sluice Gate on the Clearwell Inlet Chamber (G-6-2)
• 
  View of the 24” finish water pipe installation from inside the Clearwell Basin
• 
  View of the 24” finish water piping 90º bend inside the Clearwell Basin

• 
  Looking at the Contact Basin 24” overflow wall penetration
• 
  Looking west at backfill along the north BWR wall
• 
  Looking easst at backfill along the north BWR wall
• 
  Looking at backfill on the west side of the BWR Basin
• 
  Looking at backfill on the west side of the BWR Basin

• 
  Looking at the backfill on the south side of the BWR
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (1 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (2 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (3 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (4 of 10)

• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (5 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (6 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (7 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (8 of 10)
• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (9 of 10)

• 
  Clockwise view of the Contact Basin walls during the leak test, from the SE corner to the NE corner (10 of 10)
• 
  Looking at tarps used to cover the east Clearwell wall
• 
  Backfill on the west side of the BWR
• 
  Backfill on the south side of the BWR
• 
  Installation of the roofing on the BWR building

• 
  Applying waterproofing on the south Clearwell wall
• 
  View of the roof drain on the BWR building
• 
  Hypalon membrane installation on the BWR building roof
• 
  Hypalon membrane installation on the BWR building roof
• 
  View of the 18” overflow pipe stubout at the SW corner of the BWR Basin

• 
  View of the 18” overflow pipe stubout at the SW corner of the BWR Basin
• 
  Reinforcement for vent in BWR Basin upper slab
• 
  30”x30” access hatch on the east end of the BWR Basin upper slab
• 
  4’x6’ access hatch in the SW corner of the BWR Basin upper slab
• 
  Reinforcement for vent piping in the BWR Basin upper slab

• 
  4’x6’ access hatch on the west end of the BWR Basin upper slab
• 
  View of the BWR Basin upper slab during concrete placement
• 
  View of the BWR Basin upper slab during concrete placement
• 
  View of the BWR Basin upper slab during concrete placement
• 
  View of the BWR Basin upper slab during concrete placement

• 
  View of the BWR Basin upper slab during concrete placement
• 
  Waterproofing on the south Clearwell wall